Knuckle
Material:
- ASTM 479/A, 304 Stainless Steel
Process:
- Cut from bar stock with automatic saw
- Turned on lathe
- Holes drilled on mill using 4th Axis
- Compound angle milled in custom fixture
Size:
- 4.00" Diameter by 1.50" thick
|
|
Flange
Material:
- ASTM 276, 304 Stainless Steel
Process:
- Cut from bar stock with automatic saw
- Turned on lathe
- Holes drilled on mill
Size:
- 4.00" Diameter by 0.55" thick
|
|
Plug
Material:
- ASTM 479A, 304 Stainless Steel
Process:
- Turned from bar stock on lathe using automatic bar feeder
Size:
- 1.12" Diameter by 0.50" thick
|
|
Body
Material:
- ASTM 479A, 304 Stainless Steel
Process:
- Turned from bar stock on lathe using automatic c bar feeder
Size:
- 1.50" Diameter by 0.875" thick
|
|
Bracket
Material:
- 304 Stainless Steel, 0.079 thick
Process:
- Material slit from sheet
- Part blanked on progressive die
- Part formed on progressive die
- Part polished
Size:
- 7.25" long by 2.00" wide by 1.50" tall
|
|
Handle
Material:
- 304 Stainless Steel Tube, 1.00" Diameter by 0.059" thick
Process:
- Tube cut to various lengths
- Tube bent in manual tube bender
- Weld pieces together
- Grind and polish welds
Size:
- 34.50" long by 20.25" wide
|
|
Ring
Material:
- 304 Stainless Steel Tube, 1.3125" Diameter by 0.065" thick
Process:
- Bend tube into coil with hydraulic tube roller
- Cut coil on bandsaw
- Drill hole to let gas escape
- Weld ring together
- Grind down weld
- Polish until weld is not visible
Size:
- 20.00" Diameter
|
|
Angle Ring
Material:
- A36 Angle Steel, 0.75" by 0.75" by 0.125"
Process:
- Cut to length
- Bend part into ring with manual bender
- Stamp notches into part
Size:
- 19.50"
|
|
Washer
Material:
- 304 Stainless Steel, .05mm thick
Process:
- Stamp on compound die
- Tumble to remove burrs
Size:
- 1.870" Diameter
|
|
|
|
|
